AVE Vsi-Pro Max Specifications download pdf (Page 7)

INFORMATION 0 ON

INFORMATION 1 ON

INFORMATION 2 ON

INFORMATION 3 ON

EXIT

INFORMATION DISPLAY Setup

Press the “Up” or “Down” button to move the cursor to “IP ADDRESS” and press “Set” to

show or hide the Bank Information display.

4.) Press the “Up” or “Down” button to move the cursor to “Download Configuration” and

press “Set” to execute. Make sure a TCPIP232 Adapter is connected and the VSI-Pro will

download the configuration to this device.

TCPIP232 LED Indicators

GREEN POWER TCPIP-232 Power Status

RED RECEIVE TCPIP-232 Receive Data from ATM

GREEN LINK ATM Status, On = Ready/OFF = Not ready

YELLOW SPEED OFF = 10Mbps, On = 100Mbps Ethernet

RED REGCOM Regcom Network Communication

AVE RS485 Network

TCPIP232 is able to interface with multiple devices on AVE RS485 Network that uses the

Vnet or Regcom Protocol. The TCPIP232 is a slave device which needs to connect with

master unit for the purpose of transaction logging.

Before connecting to the RS485 network, you must program the TCPIP232 Adapter to be the

same protocol of the RS485 network so the ID will not duplicate with another devices.

Cables and Pin assignments

TCPIP232 Stand alone - VSI-Pro(AVE P/N: 021-041-SF)

This is RS232 cable for sending data to the VSI-Pro in Generic mode and Output to

the DVR.

TCPIP232 VSI-Pro DVR

DB9 Male DB9 Male DB9 Female

Pin-5(GND)-------------------------Pin-5(GND)----------------------------Pin-5(GND)

Pin-3(TXD)-------------------------Pin-2(RXD)

Pin-3(TXD)-----------------------------Pin-2(RXD)

Pin-1(Alarm)

Note: You must use 021-037-SF to program the IP Address of the TCPIP232 Adapter first

and then connect using 021-041-SF.

PAGE 7

1 2 3 4 5 6 7 8 9 10 11 12

No comments

AVE Vsi-Pro Max Specifications Page 7