TwistPlex UTP Product Line UTP 4X1500 4 Camera Passive Hub Installation Manual
Top Cover Base Cover Step 4 Top and back cover are separated as shown below. Step 1 Remove the two countersunk screws from the rear of the metal cas
Before After approx. 5 mm Step 9 Strip the UTP cable with 5 mm copper exposed. Please take note on the polarity during installation. Step 10 Use the
July 2007 UK and Western Europe AVE Multiview Unit 1C, The Potteries, Woodgreen Road, Waltham Abbey Essex, EN9 3SA, UK Tel: 440-870-770-9323 Fax: 440-
Comments to this Manuals