AVE Video Serial Synchronous ATM Interface VSSI-PRO Instruction Manual

February 2013ATM TCP/IP InterfaceStand alone or with VSSI-Pro/VSI-Pro/VSI-Pro MAXPOS TCP/IP InterfaceStand alone or with VSI-Pro /VSI-Pro MaxTTTTTCPIP

The user must be careful to unplug the LAN cable from the ATM or POS. The ATM orPOS has the protection when there is no comunication between the ATM

INTERFACE SETTINGINTERFACESelections; Generic, RegCom57600, RegCom9600, VnetSelect Generic if you connect with VSSI-Pro/VSI-Pro/Max then select VSSI-P

TIME SYNC SETTINGS* DATE FORMAT MM/DD/YY- TIME SYNC OFFTIME SYNC SETTINGSDATE FORMATP ADDRESSSelect date format to be MM/DD/YY , DD/MM

CRECash Register Express filter format. Connecting diagram and TCPIP232setting refer to page 25.GILBRACO PASSPORTGILBRACO PASSPORT filter format. Def

TCPIP 232 Vonnecting with ATM1. Connecting diagramFigure 6. ATM Stand Alone Tapping Mode ConnectionCAT-5VideoSerialDVRTCPIP232ATMFigure 8. ATM with RS

3. Setting the IP Address in TCP/IP Setting Menu to be an IP of the ATM. TCPIP SETTING* IP ADDRESS 192.168.0.0- DESTINATION PORT ANY

1. Connecting DiagramFigure 9. EPSON or GENERIC LAN PRINTER Stand Alone Tapping Mode ConnectionFigure 10. EPSON or GENERIC LAN PRINTER Stand Slone Mi

3. Setting the IP Address in TCP/IP setting menu to be an IP of the printer. TCPIP SETTING* IP ADDRESS 192.168.0.0- DESTINATION PORT

TCPIP 232 Connecting with NCRACS1. Connecting DiagramFigure 12. NCRACS Stand Alone Tapping Mode ConnectionCAT-5VideoSerialDVRTCPIP232Figure 14. NCRACS

3. Setting the IP Address in TCP/IP setting menu to be an IP of NCRACS. TCPIP SETTING* IP ADDRESS 192.168.0.0- DESTINATI

AVE Multiview UKEndeavor House 3rd FloorCoppers End Rd.,Stansted,Essex, CM24 1SJ, UKTel: 440-845-600-9323Fax: 440-845-600-9363Email: ave-uk@multiview.

CAT-5CAT-5SerialTCPIP232Figure 15. ATM Dump Data Tapping Mode ConnectionTCPIP 232 Connecting Diagram with Filter Type Setting as DUMP.Rounter/NetworkS

4. Open Hyper Terminal program on the PC and setting Set comport at baud rate 19200,N,8,1 Flow control NONE.3. Setting the IP Address in TCP/IP set

5. Select Emulation to be ANSI.226. Click on ASCII setup button then set ASCII Sending and ASCII Receiving as follows.

8. Locate the file that need to capture.7. Click on Tranfer Menu and select Capture Text23

9. Click Call menu and select call for ready to receive data from RS232.10. Try to make some transaction from ATM or Cash register and transaction dat

TCPIP 232 Connecting with Cash Register Express(CRE)Figure 20. Cash Register Express Mirror Mode ConnectionFigure 19. Cash Register Express Tapping Mo

2. Setting TCPIP 232 in FILTER TYPE to be CRE.Figure 21. Cash Register Express Client Server Setting RS485 Network InterfaceCAM1-4 INPUTCAM2CAT-5CAM3C

3. Setting the IP Address in TCP/IP setting menu to be an IP of the Cash Register Express server PC. TCPIP SETTING* IP ADDRESS 1

7. Click on “Setup” button(1) and click on “Setup Screen” (2) then Setup Screen setting will appear.6.Setting network environment of the client Ca

8. Put the IP of Cash Register Expressx server by click on “Hardware” tab(1) and click on “Page2” tab(2) and put the IP of the Cash Register Expre

CONTENTSBOOT MENU...5ITC

1. Connecting diagramFigure 22. Gilbraco Passport stand alone tapping mode connectionFigure 23. Gilbraco Passport stand alone mirror mode connectionFi

3. Setting the IP Address in TCP/IP setting menu to be an IP of printer. TCPIP SETTING* IP ADDRESS 192.168.0.0- DESTINAT

1. Connecting DiagramFigure 25 INFO GENESIS Stand Alone Tapping Mode ConnectionFigure 26. INFO GENESIS Stand Alone Mirror Mode ConnectionFigure 27. I

3. Setting the IP Address in TCP/IP setting menu to be an IP of printer. TCPIP SETTING* IP ADDRESS 192.168.0.0- DESTINAT

1. Connecting diagramFigure 28. DIGISM 5500 Stand Alone Tapping Mode ConnectionFigure 29. DIGISM 5500 Stand Slone Mirror Mode ConnectionFigure 30. DIG

3. Setting the IP Address in TCP/IP setting menu to be an IP of printer. TCPIP SETTING* IP ADDRESS 192.168.0.0- DESTINAT

The TCPIP232 Micros VSS 3700 is able to receive UDP Messages from up to 16 MicrosWorkstation Stations simultaneously and output via one RS-232 using t

TCPIP232 Micros VSS 3700 Hardware Configuration:Figure 32. TCPIP232 Hardware SilkscreenDefault settings for TCPIP232 Micros VSS 3700 UDP Interface1. C

Press the Arrow key to move the cursor or change the configurations Press the Enter key toselect or save the configurations.IP Address/Subnet Mask/Gat

39 Workstations Settings* 1.Enable 000000001- 2.Enable 000000002- 3.Enable 000000003- 4.Enable 000000004- 5.Disable 000000005- 6.Disable 000000006- 7.

4FIGURESFigure 1: Stand Alone Connection...7Figure 2: VSSI

VSSI-Pro SetupConnect the TCPIP232 adapter to the VSSI-Pro with the provided cable(021-010-SF),connect video, ATM LAN and power up both units.1.Enter

VSI-Pro and VSI-Pro MAX Setup1.To access the main-menu of the VSI-Pro, simultaneously hold down the “Down” & “Up”buttons and press and release the

INFORMATION 0 ONINFORMATION 1 ONINFORMATION 2 ONINFORMATION 3 ONEXITINFORMATION DISPLAY SetupPress the “Up” or “Down” butt

TCPIP232 RS485 - VSI-Pro MAX(AVE P/N:021-139-SF)This is RS485 cable for TCPIP232 Adapter connect to VSI-Pro MAX RJ45 Networkconnections for the purpo

44Firmware UpdateTCPIP232 is able to update firmware by connecting with the PC/DVR cable (021-037-SF)which comes from the TCPIP232 adapter to your la

Download mode message will appear and ready to send the firmware file to the TCPIP232Click Transfer menu and select “Send Text file” then select .bin

TCPIP232 TestingThe TCPIP232 can be tested by using 2 computers in simulate mode.Connect theequipment same as below.This connecting diagram has no nee

LIMITED WARRANTY(Terms and Conditions)For 2 Years from the date of shipment, Seller warrants to Buyer that the Product is free from defects inmaterial

AVE (Thailand) Co., Ltd.147 Soi On-Nut 44Sukhumvit 77 Rd., Suan LuangBangkok, 10250 ThailandTel: 662-331-9364, 331-9285 Fax: 662-331-9365Email: ave@av

BOOT MENUTCPIP232 is able to select upon boot u p to the “TCPIP232 ATM/POS” , “VSS 3700” or“UPDATE FIRMWARE” by connecting the PC/DVR cable (021-037-

VSS 3700By selecting the VSS 3700 you will enter to the VSS 3700 operating mode.Wait for the TCPIP232 to reboot and show the message as below. You wil

TCPIP232 Connections1. Stand Alone with Digital Video RecorderThis connection will inteface directly to a DVR which supports Text Insertion. This in-s

3. VSI-Pro or VSI-Pro Max InterfaceThe VSI-Pro and VSI-Pro Max supports Text Insertion and programmable gray scaleand background of text inesertion an

TCPIP232 Hardware Configuration:TCPIP232 hardware operation depends on your network connection. TCPIP232 isable to operate with HUB and Network Switch